LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2017 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 89 (General Electrical System - Repair -- F55) >> Plug Connections, Terminals >> 61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ

61 13... Socket housings, 5-pin, 8-pin, System MQS/MPQ

WARNING: This page is about a different variant/trim than selected.

Manufactured by AMP:  The following contact types without single conductor seal can be fitted in the connector housings:

Socket housing, 5-pin (Hybrid System MQS/MPQ) 

Raise fastener (1) over snap-in lug (2) and detach from contact carrier (3).

Fig 1: Detaching Contact Carrier (5-Pin)
G08509510Courtesy of BMW OF NORTH AMERICA, INC.

Socket housing, 8-pin (MQS): 

Raise fastener (1) over snap-in lug (2) and detach from contact carrier (3).

Fig 2: Detaching Contact Carrier (8-Pin)
G08509511Courtesy of BMW OF NORTH AMERICA, INC.

Hold down snap-in hooks (1) of contact and pull cable with contact as far as secondary lock (2).

Fig 3: Pulling Wire With Socket Contact As Far As Secondary Lock
G04727548Courtesy of BMW OF NORTH AMERICA, INC.

Hold down snap-in hooks in secondary lock (1) again and pull cable with contact (2) completely out of contact carrier (3).

Fig 4: Pulling Wire With Socket Contact Out Of Contact Carrier
G04727549Courtesy of BMW OF NORTH AMERICA, INC.