61 13... Socket housing 42-, 43-, 46-pin, Hybrid System MQS/MPQ

Special tools required: 

• 61 0 312

Manufactured by AMP:  The following bushing housings without single conductor seal can be fitted in the socket housings:

• MQS (Micro Quadlock System)
• MPQ, width 2.8 mm (Micro Power Quadlock)
• MPQ, width 5.2 mm (Micro Power Quadlock)

Open secondary locks (1) on socket housing.

Press back safety catch of MQS contacts (2) with special tool 61 0 312 (61 1 134) and pull out cable with contact.

Press back safety catch of MPQ contacts (3) with screwdriver and pull out cable with contact.

Fig 1: Opening Secondary Locks On Socket Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Bend open safety catch of contacts gently before inserting into connector housing.

For installation of contacts, observe chamber numbers on reverse side of socket housing.

Fig 2: Chamber Numbers On Reverse Side Of Socket Housing

Courtesy of BMW OF NORTH AMERICA, INC.