61 13... Inline connectors, 15-pin, System D2.5

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling External Connector Area Of Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) up to stop in arrow direction.

Fig 2: Pulling Internal Connector To Stop

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back snap-in hooks (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Back Snap-In Hooks Of Corresponding Contact

Courtesy of BMW OF NORTH AMERICA, INC.