32 31 090 Removing and installing/replacing steering column

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks :

Removal :

Feed out steering column shroud (1) from instrument cluster holder (2).

Fig 1: Steering Column Shroud And Instrument Cluster Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Steering Shaft And Clamping Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Release clamping bolt (1).

Release steering column from steering shaft (2).

Release nuts (1) on bottom of steering column (2).

Fig 3: Nuts On Steering Column Bottom

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Removing Front Steering Column

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Unclip wiring harness holder from steering column.

Carefully remove steering column (2) towards the front.

Installation :

Replacement only:

Remount sheet metal nuts (1).

Fig 5: Sheet Metal Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 6: Steering Column And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully insert and position steering column (2) in instrument panel trim.

Secure wiring harness on steering column.

Tighten down nuts (1).

Tightening torque 32 31 1AZ .

Tighten nuts (1) on bottom of steering column (2).

Tightening torque 32 31 1AZ .

Fig 7: Nuts On Steering Column Bottom

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 8: Steering Shaft And Clamping Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Insert steering column into steering shaft (2).

Tighten clamping bolt (1).

Part : Renew clamping bolt (1).

Tightening torque 32 31 3AZ .

Feed instrument cluster holder (2) through steering column shroud (1).

If necessary, feed wiring harness instrument cluster (3) through steering column shroud (1).

Fig 9: Steering Column Shroud And Instrument Cluster Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work :