61 31 134 Removing and installing/replacing USB audio interface connecting socket

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Removal:

Unclip cover (1) from trim panel (2) with special tool 00 9 325 .

Unlock and disconnect connector behind.

Fig 1: Unclipping Cover From Trim Panel With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Release detent on both sides while at the same time pressing connecting socket (1) out of cover (2).

Fig 2: Releasing Detent On Both Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Join connecting socket (1) in cover (2).

NOTE: Ensure connecting socket (1) engages correctly in cover (2).

Fig 3: Releasing Detent On Both Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Clamps on trim (1) must not be damaged or missing.

Connect associated connector.

Clip in cover (1) into trim panel (2).

Fig 4: Clipping Cover Into Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.