27 10 710 Replacing classification resistor for control motor S63 (ATC 700)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Delete previous resistance values when replacing the resistor.
Using BMW diagnosis system, work through test program in accordance with instructions.
Using BMW diagnosis system, work through test program in accordance with instructions.
Necessary preliminary tasks
- Remove EXHAUST SYSTEM .
- Remove heat shield.
Disconnect connector (1).
Release screw (2) and remove resistor.
Tightening torque 27 00 14AZ .