65 77 730 Removing and installing (replacing) vehicle center sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

WARNING: NOTE AIRBAG SAFETY INSTRUCTIONS!
Incorrect handling can activate airbag and cause injury.

NOTE: Follow instructions for HANDLING OPTICAL FIBERS .

Necessary preliminary tasks:

DISCONNECT BATTERY NEGATIVE LEAD and cover
Remove CENTER CONSOLE

NOTE: Middle rear compartment ventilation duct shown removed for purposes of clarity.

Unfasten plug connection (1) and disconnect.

Release screws (2), tightening torque 65 77 6AZ .

Remove vehicle center sensor (3).

Fig 1: Identifying Plug Connection, Screws And Vehicle Center Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/CODING .