LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4216 (General Electrical System - Repair - F31) >> Control Units, Modules, Sensors, Aerials >> 61 35... Overview, rain sensor (additional work when replacing the windscreen/sensor replacement)

61 35... Overview, rain sensor (additional work when replacing the windscreen/sensor replacement)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor/Programming/encoding necessary When replacing the sensor/Initialization required Connecting the diagnosis system required
Condensation sensor square 30 x 20 mm Yes No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing substitute visuals Programming/encoding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes - Yes Yes
RLS approximately ø 50 mm No (new substitute visuals  required, refer parts available through BMW) - No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing substitute visuals Programming/encoding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
RLPSS (Rain, light and precipitation solar sensor) (Designation is located on the back of the sensor) approximately ø 50 mm Yes Yes - Yes Yes
RLS (vehicle with no HUD)  (Designation is located on the back of the sensor) approximately ø 50 mm No (new substitute visuals  required, refer to parts available through BMW) - No Yes Yes
RLSS (vehicle with HUD  ) (Designation is located on the back of the sensor) approximately ø 50 mm Yes Yes - Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing substitute visuals Programming/encoding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnosis system required
all types approximately ø 35 mm No No - Yes Yes
all types approximately ø 50 mm Yes Yes - Yes Yes
Only for F25:  RLS approximately ø 50 mm No (new substitute visuals  required, refer to parts available through BMW) - No Yes Yes
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types approximately ø 35 mm No No No No
Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all up to 03/2014  except SBS (01) (Designation is located on the back of the sensor) approximately ø 35 mm No No Yes Yes
SBS (01) (Designation is located on the back of the sensor) approximately ø 35 mm No No No No
All as from 03/2014  approximately ø 35 mm No No No No

BMW i: 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types approximately ø 35 mm No No No No

MINI (all): 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes Yes Yes
all types approximately ø 35 mm No No No No

Rolls-Royce (all): 

Sensor type/Sensor shape With windscreen replacement sensor required When replacing the sensor Programming/encoding necessary When replacing the sensor Initialization required Connecting the diagnosis system required
all types square 60 x 40 mm No Yes Yes Yes
all types approximately ø 35 mm No No Yes Yes
all types approximately ø 50 mm Yes Yes Yes Yes