32 00... Moving vehicle into design position
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move VEHICLE INTO NORMAL POSITION
- F01/F02/F07/F11: Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to FRONT AXLE - RIDE HEIGHT
and REAR AXLE - RIDE HEIGHT
).
Measure VEHICLE RIDE HEIGHT .