31 00 ... Notes on repairing threads

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine carrier may be repaired with Helicoil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Helicoil Thread Damaged Area

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Out Screw
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert

Fig 3: Inserting Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the table and screw into the locating thread until flush with the original thread

Fig 4: Identifying Helicoil Thread Insert In Accordance
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Removing Break Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.