66 31 001 Adjusting ACC Sensor

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

Lever out cap (1).

Carry out adjustment of ACC sensor (2) with special tool 36 1 130 by means of adjusting screws (3).

Fig 1: Identifying Cap, ACC Sensor And Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool required:

Active Cruise Control ACC adjusting device, complete.

Order number: 81 10 0 021 292

Consisting of:

Mirror, complete
Wheel laser
Slotted diaphragm
Control bracket (for initial installation of rail)
Rail
Setup and operating instructions (not shown)

NOTE:

A holder which is not included in the scope of delivery is required to support the wheel laser. Use either the quick-action clamp from the existing KDS or ACC wheel holder (36 1 100 ).

NOTE:

Follow instructions for ACC Adjusting Device.

Fig 2: Identifying Wheel Laser, Slotted Diaphragm, Control Bracket, Rail And Mirror, Complete

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

To adjust the ACC sensor, connect the BMW diagnosis system and fit the ACC adjusting device.

Select ACC system in diagnosis. Start test module "ACC adjustment" (service functions) and proceed in accordance with instructions.

Handle ACC adjusting device in accordance with mounting and operating instructions provided with device.

NOTE:

Further information on the ACC adjusting device can be found in the BMW Workshop Equipment and Planning Documentation.