Removal & Installation
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2007 BMW 550i, 2007 BMW 530i, 2007 BMW 525i, 2006 BMW 550i, and 2006 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
- Remove and disassemble front spring strut. See STRUT WITH COIL SPRING .
- If necessary, drive out centering pin (1). See Fig 1.
- To install, reverse removal procedure. If a spring strut bearing has been installed without centering pin, adjust wheel alignment. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.