LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4476 (Functional Description - F10 - Stability Control System, Tire & Wheel System, Lubrication System) >> Lubrication System - Functional Description >> Oil condition sensor (Ver. 1) >> Notes for Service department

Notes for Service department

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

General notes 

NOTE: condensate in the engine oil.

Condensate that forms in the crankcase due to short distance driving can influence the permittivity. As water enters the engine oil and mixes with it, moisture also collects around the oil level sensor. When excessive moisture or water is present within the crankcase: Individual instances of incorrect oil level displays may occur, while a spurious warning indicating that the oil should be topped up is also possible. The diagnostic system can process this "spurious oil-level warning" with fault pattern selection in an operation that also assesses the permittivity of the oil. However, there is no direct display of the permittivity. Among the factors that affect the oil's permittivity are its viscosity and its age. This means that an accurate assessment of oil quality cannot be guaranteed under all conditions.

NOTE: Please comply with instructions in Owner's Handbook.

The display messages available for the electronic oil level check can be found in the Owner's Handbook.