LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 404 (Steering And Wheel Alignment - Technical Data) >> Electronic Chassis Alignment >> 32 00 Wheel Alignment - Normal Position/Inspection Conditions E60/E61

32 00 Wheel Alignment - Normal Position/Inspection Conditions E60/E61

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT - NORMAL POSITION/INSPECTION CONDITIONS E60/E61 SPECIFICATIONS

Car loaded down to normal position   Vehicle with complete equipment for normal operation with:
2 x 68 kg on front seats (seats in central position);
1 x 68 kg on rear seat (center);
1 x 21 kg in luggage compartment (center) and full fuel tank.
Requirements:    
    1. Correct rims and tires with uniform tire tread.
2. Correct tire pressure (refer to instruction plate on vehicle).
3. Correct wheel bearing clearance.
4. Ride height check in normal position.
Warning! Repair vehicle in event of deviation from specified value.
5. On vehicles with pneumatic suspension, pull fuse of air supply system so as to eliminate control operations. Adjust regulation ride level for measurement = specified value +/- 2mm by loading/unloading vehicle.
scientia non olet · About LEMON Manuals