Section 2314 (Trailers - Repair)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
- Loading platform
- 00 00... Body and underbody: checking for corrosion and damage
- 00 00... Raising BMW multi-trailer
- 86 10... Adjusting brake system
- 86 10... Adjusting spring force accumulator
- 86 10... Disassembly of Camlock retaining cam
- 86 10... Disassembly of base plate
- 86 10... Disassembly of bracket on platform base
- 86 10... Disassembly of front apron
- 86 10... Disassembly of front protection bar
- 86 10... Disassembly of jockey wheel or jockey wheel mount
- 86 10... Disassembly of left and right aprons
- 86 10... Disassembly of left and right lamp housings
- 86 10... Disassembly of left and right wheel boxes
- 86 10... Disassembly of licence plate mounting plate
- 86 10... Disassembly of loading ramp frame/disassembly of rail, left/right
- 86 10... Disassembly of rear apron
- 86 10... Disconnecting plug connection, wiring harness, front/rear
- 86 10... Installation position of BMW lettering
- 86 10... Positioning of multitrailer hood for maintenance and repair work
- 86 10... Removing Camlock retaining cam on loading ramp
- 86 10... Removing Camlock screw cap
- 86 10... Removing and installing or replacing left or right coil spring
- 86 10... Removing bolt on loading ramp
- 86 10... Removing brake shoes
- 86 10... Removing entry profile section on loading ramp, left, right and center
- 86 10... Removing left or right shock absorber
- 86 10... Removing loading ramp lock
- 86 10... Removing mounting bracket sealing cap
- 86 10... Removing mounting bracket, center, left and right
- 86 10... Removing outer pull rod mount, left and right
- 86 10... Removing overrunning equipment/maintaining or replacing guide bush/installing overrunning equipment
- 86 10... Removing plastic bush/metal bush
- 86 10... Removing rear supports and bracket
- 86 10... Removing reflecting rear light
- 86 10... Removing rest on loading ramp, left, right and center
- 86 10... Removing shock absorber from overrunning equipment
- 86 10... Removing trailing arm, removing and installing or replacing mounting
- 86 10... Removing wheel bearing
- 86 10... Removing wooden rest on loading ramp, left, right and center
- 86 10... Repair work on GFP components with Gelcoat surface
- 86 10... Replacing 12 volt socket
- 86 10... Replacing bar
- 86 10... Replacing drawbar members, left and right
- 86 10... Replacing gaiter
- 86 10... Replacing holder for chock
- 86 10... Replacing lashing plate and lashing eye
- 86 10... Replacing license plate light
- 86 10... Replacing position light
- 86 10... Replacing rear light
- 86 10... Troubleshooting on multi-trailer
- Hood
- 86 21... Adjusting hood pretension - Camloc fastener with spacers
- 86 21... Adjusting rear lid to fit
- 86 21... Adjusting rotary striker lock
- 86 21... Adjusting side lid to fit
- 86 21... Attaching/replacing BMW badge
- 86 21... Fitting BMW logo
- 86 21... Installing hood seal
- 86 21... Installing rubber roof strip
- 86 21... Installing seal for rear lid and side lid
- 86 21... Installing sponge rubber seal
- 86 21... Removing ball pivot
- 86 21... Removing centering pin from mounting bracket
- 86 21... Removing gas spring
- 86 21... Removing gas spring retaining bracket
- 86 21... Removing hinge bracket on rear lid
- 86 21... Removing lid
- 86 21... Removing lock barrel
- 86 21... Removing lock striker fixture on rear lid
- 86 21... Removing plug for inside light
- 86 21... Removing roof railing
- 86 21... Removing roof railing adapter
- 86 21... Removing rotary striker lock
- 86 21... Removing side lid hinge
- 86 21... Replacing inside light
- 86 21... Replacing inside light power cable