LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> Crankshaft Position Sensor >> Removal & Installation (4-Cylinder)

Removal & Installation (4-Cylinder)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1997 BMW Z3, 1997 BMW M3, 1997 BMW 840Ci, 1997 BMW 740iL, and 1997 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Remove engine cover. See Figure. Remove screw securing sensor lead above radiator hoses. Remove sensor lead from clip holder and guide rail. Locate sensor on right side of crankshaft and remove bolt and sensor. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals