Removal & Installation (V8)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1997 BMW Z3, 1997 BMW M3, 1997 BMW 840Ci, 1997 BMW 740iL, and 1997 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Remove engine cover. See Figure. Disconnect idle speed control valve electrical connector. Remove top of air cleaner. Remove idle speed control valve mounting strap. Pull actuator from throttle body. To install, reverse removal procedure.

Fig 1: Removing Idle Speed Control Valve (4-Cylinder)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Removing Idle Speed Control Valve (6-Cylinder)

Courtesy of BMW OF NORTH AMERICA, INC.