LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (Heating And Air Conditioning - Repair) >> Auxiliary Heater With Control Elements >> 64 12... Initializing independent heating remote control

64 12... Initializing independent heating remote control

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

The following steps are required for initializing a new independent heating remote control or after replacing the Car Access System control unit:

  1. Close and then reopen central locking with vehicle remote control.
  2. Within 5 seconds: Switch ignition lock from terminal "0" to terminal "R" and then back to terminal "0".
  3. Press and hold down "OFF" button on independent heating remote control.
  4. Press "ON" button on independent heating remote control 3 times in succession

The vehicle's central locking closes and opens automatically on successful initialization.

NOTE: Both independent heating remote controls must be reinitialized after the Car Access System control unit has been replaced.
scientia non olet · About LEMON Manuals