65 75 071 Removing And Installing (Replacing) Module For Passenger Compartment Sensor

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove make-up mirror and front console insert . See 51 44 180 REMOVING AND INSTALLING / REPLACING REAR CONSOLE INSERT / MAKE-UP MIRROR IN REAR COMPARTMENT .

Open detent lugs (1) in direction of arrow and remove module for passenger compartment sensor (2) from front console insert (3).

Fig 1: Opening Detent Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming. See VEHICLE PROGRAMMING AND CODING .

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS
Courtesy of BMW OF NORTH AMERICA, INC.