LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (General Electrical System - Repair) >> 31 Switch >> 61 31 175 Removing And Installing/Replacing Switch For Slide/Tilt Sunroof

61 31 175 Removing And Installing/Replacing Switch For Slide/Tilt Sunroof

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Lever out insert (1) in direction of arrow.

Disconnect plug connections underneath and remove insert (1).

Fig 1: Identifying Plug Connections And Insert
G04768583Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Disconnecting the plug connection for the hands-free microphone or emergency SOS call button results in fault memory entries in the telephone control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete entries.

Unlock slide/tilt sunroof (1) and press from inside out of insert (2).

Installation: 

Initialize slide/tilt sunroof.  See 54 0 ... NOTES ON STEEL AND GLASS SLIDE/TILT SUNROOFS (INITIALIZATION/NORMALIZATION/LEARNING OF CHARACTERISTIC CURVE) .

Fig 2: Identifying Slide/Tilt Sunroof And Insert
G04768584Courtesy of BMW OF NORTH AMERICA, INC.