LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (General Electrical System - Repair) >> 31 Switch >> 61 31 067 Removing And Installing/Replacing Distribution Switch

61 31 067 Removing And Installing/Replacing Distribution Switch

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Remove and install flap in luggage compartment panel on right  . See 51 47 172 REMOVING AND INSTALLING / REPLACING FLAP IN LUGGAGE COMPARTMENT TRIM, LEFT OR RIGHT .

Feed out emergency actuation pull strap (1) in direction of arrow.

Fig 1: Identifying Strap In Direction Of Arrow
G04769132Courtesy of BMW OF NORTH AMERICA, INC.

Lever distribution switch (1) with special tool 64 1 020  out of fixture (2).

Fig 2: Identifying Lever Distribution Switch And Special Tool (64 1 020)
G04768560Courtesy of BMW OF NORTH AMERICA, INC.