51 45 ... Removing And Installing/Replacing Center Instrument Panel Trim

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove wood trim on instrument panel on right.

Release screws (1).

Pull out trim (2) slightly in direction of arrow.

Fig 1: Pulling Out Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) from PDC switch and detach.

Remove trim (2).

Installation:

Make sure retainers (3) engage correctly in openings (4).

Fig 2: Identifying Plug And Trim

Courtesy of BMW OF NORTH AMERICA, INC.