61 31 334 Removing And Installing Or Replacing Grip Trim For Gear Selector Switch

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 030

Turn end ring (1) in direction of ring and lower.

Fig 1: Turning End Ring In Direction Of Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 64 1 030 from below into trim (1) and carefully pull off trim (1).

Remove symbol plate (2).

Installation:

To facilitate fitting, secure pushbutton (3) with adhesive tape on trim (1).

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.