32 33 000 Removing And Installing/Replacing Steering Wheel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect battery negative lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
Remove airbag unit . See 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT (BASIC STEERING WHEEL) .

Move wheels to straight-ahead position.

Pull off plug (1).

Release screw (2).

Remove steering wheel.

Fig 1: Identifying Steering Wheel Plug And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, move wheels to straight-ahead position.

Align steering wheel by means of coding (see grooved toothing) to steering column and attach. The locking pin (1) must engage in the corresponding receptacle of the driver (2).

Tightening torque 32 33 1AZ . See STEERING AND WHEEL ALIGNMENT - TIGHTENING TORQUES .

Fig 2: Identifying Locking Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove steering wheel module control unit . See 61 31 231 REMOVING AND INSTALLING/REPLACING STEERING WHEEL ELECTRONICS CONTROL UNIT or 61 31 232 REMOVING AND INSTALLING/REPLACING STEERING WHEEL MODULE CONTROL UNIT (SPORTS STEERING WHEEL) .

Remove multifunction steering wheel switches on both sides . See 61 31 220 REMOVING AND INSTALLING/REPLACING MULTIFUNCTION STEERING WHEEL SWITCH .