31 35 007 Removing And Installing/Replacing Holder For Left Or Right Push Rod/Stabilizer

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Remove front wheel .

Remove STABILIZER LINK from holder (1).

Release screw (2).

Tightening torque 31 35 10AZ . See 31 35 STABILIZER BAR for specs.

Fig 1: Identifying Holder And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Support swivel bearing with workshop jack and a suitable mounting.

Unscrew nut (1).

Remove holder (2) for brake hose, pulse generator and if necessary brake pad sensor.

Remove screw (4) with holder (3) towards front.

Installation:

Replace self-locking nut.

Tightening torque 31 31 3AZ . See 31 31 SPRING STRUTS for specs.

Fig 2: Identifying Holder, Screw And Nut

Courtesy of BMW OF NORTH AMERICA, INC.