32 31 102 Replacing steering spindle sleeve
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove lower section of steering spindle See 32 31 070 Removing and installing/replacing lower section of steering spindle .
- Remove accelerator pedal module . See PEDAL ASSEMBLY - REPAIR .
Remove sleeve (1) from bulkhead.
Installation:
Coat sleeve from outside with silicone grease and insert from passenger compartment. Arrow (1) on sleeve must point horizontally to left.
Check seating of sleeve in bulkhead, correct if necessary.
After installation:
- Carry out steering angle sensor adjustment/adjustment for active front steering . See 61 31 996 Carry out steering angle sensor adjustment .