32 31 004 Removing and installing / replacing upper section of steering column trim

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove lower section of trim
Move steering column into "lower" and "extended" position

Unclip steering column cover (1) from upper section of trim.

Fig 1: Identifying Steering Column Cover

G04742431

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 2: Locating Expansion Rivets

G04742432

Courtesy of BMW OF NORTH AMERICA, INC.

Bend upper section of trim on both sides outwards and remove towards top.

Fig 3: Bending Upper Section Of Trim On Both Sides Outwards

G04742433

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 4: Identifying Locks And Hooks

G04742434

Courtesy of BMW OF NORTH AMERICA, INC.