61 35 147 Removing and installing/replacing convertible top module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323

Necessary preliminary tasks:

Disconnect and cover battery negative lead.

Lever out cover (1) with special tool 00 9 323 and remove.

Fig 1: Disconnecting And Cover Battery Negative Lead

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For purposes of clarity, the rear side trim is shown removed.

Unscrew nut (1).

Feed out convertible top module (3) through created opening.

Unlock plug connections (2) and disconnect.

Remove convertible top module (3).

Fig 2: Unlocking Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
If necessary, car & key memory
CD "CIP"

Fig 3: Identifying Carry Out Coding/Programming

Courtesy of BMW OF NORTH AMERICA, INC.