32 00 Wheel Alignment - Normal Position/Inspection Conditions E65/E66

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT - NORMAL POSITION/INSPECTION CONDITIONS - SPECIFICATIONS (E65/E66)

Car loaded down to normal position		Vehicle with complete equipment for normal operation with: 2 x 68 kg on front seats (seats in central position); 1 x 68 kg on rear seat (center); 1 x 21 kg in luggage compartment (center) and full fuel tank.
Requirements:
		Correct rims and tires with uniform tire tread. Correct tire pressure (refer to instruction plate on vehicle). Correct wheel bearing clearance. Ride height check in normal position (see above). Ride level measurement, refer to RIDING HEIGHT . WARNING: Repair vehicle in event of deviation from specified value. On cars with air suspension, extract fuse from air supply unit to ensure vehicle suspension cannot rise or fall. Adjust regulation ride level for measurement = specified value +/- 2mm by loading/unloading vehicle.