61 35 085 Removing And Installing (Replacing) Control Unit For Left Or Right Seat Adjustment (Rear Seat)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760Li, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Disconnect battery negative lead. Refer to 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
Remove luggage compartment wheel arch trim on left. Refer to 51 47 151 REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT WHEEL ARCH TRIM .

Disconnect all plug connections (1).

Unlock catches (2), feed control unit for seat adjustment (3) in direction of arrow out of holder (4) and remove.

Fig 1: Plug Connections, Catches, Seat Adjustment Control Unit, Holder And Removal Directions

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming.
Coding.
Car & Key Memory.
CD "CIP".

Fig 2: Programming Equipment
Courtesy of BMW OF NORTH AMERICA, INC.