61 31 192 Replacing Knob For Controller

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760Li, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required:

00 9 317
00 9 323

Attach special tools 00 9 323 and 00 9 317 as illustrated.

Lever out knob for controller (1) on both sides in direction of arrow and detach.

Fig 1: Controller Knob, Special Tools (00 9 323), (00 9 317) And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Positioners (2) of knob for controller (1) must engage in openings (3) of controller (4).

For this purpose, fit knob for controller (1), turn in direction of arrow until positioners (2) engage stop.

If necessary, turn on ignition to prevent controller (4) from turning as well.

Press knob for controller (1) in middle until it engages.

Fig 2: Controller, Controller Knob, Positioner, Opening And Removal Directions

Courtesy of BMW OF NORTH AMERICA, INC.