32 00... Move Vehicle Into Normal Position

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA .
Version with air spring system:
- Carry out ride-height-calibration 37 12 010 CARRY OUT RIDE-HEIGHT CALIBRATION
- Pull fuse(s) for air supply unit control unit
Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle
Determine vehicle ride height, refer to RIDING HEIGHT

Note: If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).