LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4476 (Functional Description - F10 - Stability Control System, Tire & Wheel System, Lubrication System) >> Stability Control System - Functional Description >> Dynamic stability control (DSC) >> Diagnosis instructions >> Sequence for replacement of DSC unit or DSC control unit

Sequence for replacement of DSC unit or DSC control unit

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

After replacing the DSC unit or DSC control unit The parameters for the Run Flat Indicator (RPA) as well as for the cruise control system must be coded using ISTA/P.

Perform the following operations:

  1. It may be necessary to program and encode the DSC
  2. Perform DSC unit brake bleeding procedure
  3. Perform brake line mix-up test
  4. Calibrate solenoid valves
  5. Initialize Run Flat Indicator (see operating instructions)
scientia non olet · About LEMON Manuals