DTC: Dynamic Traction Control

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

The function DTC corresponds to that of DSC with a slightly modified control strategy. DTC is designed to provide optimal DSC control of drive torque under specific road-surface conditions. The dynamic traction control (DTC) provides improved traction with partially reduced driving stability and is thus only recommended for exceptional situations.

DTC can be activated by shutting down DSC (DTC button). Advantage: DTC provides higher traction and improved dynamics where driving safety is limited. Interventions to stabilize the vehicle (e.g. reduction in the engine output) are carried out slightly later than in the case of DSC. In certain situations, the driver must intervene correctively to stabilize the vehicle.

In the following exceptional situations, it can be useful to activate DTC briefly:

When rocking the vehicle or starting off in deep snow or on loose, low-traction surfraces.
When driving on snow-covered slopes, slush or uncleared roadways.
When driving with snow chains.