System functions
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
The following illustration shows the functional networking.
| Index | Explanation |
|---|---|
| 1 | Front left wheel speed sensor |
| 2 | Brake pad wear sensor, front left |
| 3 | Brake fluid level switch |
| 4 | Dynamic Stability Control (DSC) |
| 5 | DME (Digital Engine Electronics) or DDE (Digital Diesel Electronics) |
| 6 | Front right wheel speed sensor |
| 7 | Front power distribution box |
| 8 | Junction Box Electronics (JBE) |
| 9 | Rear right wheel speed sensor |
| 10 | Brake pad wear sensor, rear right |
| 11 | Electromechanical parking brake (EMF) |
| 12 | Integrated chassis management (ICM) |
| 13 | DTC button (in the center console control panel) |
| 14 | Parking brake button and Automatic Hold button |
| 15 | Telematic Control Unit (TCU) or Combox |
| 16 | Brake light switch |
| 17 | Instrument cluster (KOMBI) |
| 18 | Rear left wheel speed sensor |
| 19 | Steering column switch cluster (SZL) |
| 20 | Central gateway module (ZGM) |
| 21 | Footwell module (FRM) |
| 22 | Car Access System (CAS) |
The following system functions are described for the DSC:
- DTC: Dynamic Stability Control
- Brake standby through application at an early stage of the brake pads when required
- Dry braking of the brake discs on wet roadways
- Fading Brake Support
- Drive-off assistant
- Cruise control with brake function
- electromechanical and hydraulic parking brake
- ABS: Antilock braking system
- EBV: Electronic brake force distribution
- CBC: Cornering Brake Control
- MSR: Engine drag torque control
- ASC: Automatic Stability Control
- DSC: Dynamic Stability Control
- DBC: Dynamic Brake Control
- Trailer Stability Control
Other known system functions for the DSC are:
The following additional functions that do not belong to driving dynamics control are integrated:
- RPA: Run Flat Indicator
- CBS: Condition Based Service