61 00... Notes on handling optical fibres

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: To avoid damage when handling optical fibres, comply with the following points:

The minimum permitted bending radius is 25 mm
Do not subject optical fibres to compressive and tensile load
Protect optical fibres against the effects of heat ≥85 °C (e.g. during welding work, drying work with infrared beams or hot air blower)
Fibre-optic cables are permitted to show only one junction point (bridge), replace fibre-optic cables if necessary

NOTE: The optical fibres are colored differently as follows:

Green = MOST (M edia O riented S ystems T ransport) optical fibre
Yellow = ISIS (I ntelligent S afety and I ntegration S ystem) optical fibre
Orange=repair fibre-optic cables

Follow notes for processing cables and optical fibres. See CUTTING OFF/STRIPPING/CUTTING TO LENGTH and CRIMPING OPTICAL FIBRES .