33 00... Rear Axle: Wheel Alignment Check Must Be Carried Out After The Following Work (528i, 535i, 535d, 550i)

WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Swinging, Guide Arm, HSR Actuator, Wishbone And Wheel Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Graphic F01/F02.

A WHEEL ALIGNMENT CHECK must be carried out after the following work:

Release the following screw connection:
- Swinging arm, front/rear, to rear axle support.
- Swinging arm to integral link/wheel carrier.
- Guide arm to rear axle support/HSR unit.
- Wishbone to rear axle support/wheel carrier.
Replacement of following parts:
1. Rear axle support.
2. HSR actuator.
3. Toe arm.
4. Swinging arm.
5. Wheel carrier.
6. Integral link.
7. Wishbone.