32 00... Test Conditions For Chassis/Wheel Alignment Check
WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Only BMW approved wheel and tire combinations may be installed on the vehicle.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire pressure (see label on vehicle).
- All chassis and suspension components must be technically OK.
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
- Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.