LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3674 (Steering And Wheel Alignment - Technical Data) >> Wheel Alignment >> 32 00 Wheel Alignment

32 00 Wheel Alignment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS

OBSERVE TEST CONDITIONS!    
Front axle:    
Total toe-in   0° 12' ± 12'
Adjustment total toe(1)   0° 12' ± 4'
Toe difference(2) single wheel between left/right   max. 12'
Camber
(difference between left/right max. 30')		   - 0° 11' ± 30'
Adjustment camber(1)   - 0° 11' ± 25'
Toe difference angle (difference between left/right max. 30')   -2° 00'
Caster angle   (difference between left/right max. 30')
Front wheel offset   0° ± 15'
Maximum wheel lock    
  • Inner cornering wheel
 approx. ° 43° 48'
  • Outer cornering wheel
 approx. ° 33° 42'
Rear axle:    
Total toe-in   0° 12' ± 12'
Adjustment total toe(1)   0° 12' ± 4'
Camber (difference between left/right max. 30')   -1° 40' ± 25
Adjustment camber(1)   -1° 40' ± 5'
Geometrical driving axis   0° ± 12'
(1) To minimize adjusting errors (measuring inaccuracies), use a narrower tolerance for adjusting toe/camber.
(2) Toe difference front axle = criterion for steering wheel inclination


WHEEL ALIGNMENT SPECIFICATIONS

OBSERVE TEST CONDITIONS!    
Front axle:    
Total toe-in   0° 12' ± 12'
Adjustment total toe(1)   0° 12' ± 4'
Toe difference(2) single wheel between left/right   max. 12'
Camber
(difference between left/right max. 30')		   - 0° 11' ± 30'
Adjustment camber(1)   - 0° 11' ± 25'
Toe difference angle (difference between left/right max. 30')   - 2° 00'
Caster angle   (difference between left/right max. 30')
Front wheel offset   0° ± 15'
Maximum wheel lock    
  • Inner cornering wheel
 approx. ° 43° 48'
  • Outer cornering wheel
 approx. ° 33° 42'
Rear axle:    
Total toe-in   0° 12' ± 12'
Adjustment total toe(1)   0° 12' ± 4'
Camber (difference between left/right max. 30')   -1° 40' ± 25'
Adjustment camber(1)   -1° 40' ± 5'
Geometrical driving axis   0° ± 12'
(1) To minimize adjusting errors (measuring inaccuracies), use a narrower tolerance for adjusting toe/camber.
(2) Toe difference front axle = criterion for steering wheel inclination
scientia non olet · About LEMON Manuals