13 62 593 Removing and installing/replacing pressure sensor on left intake plenum (N63, S63)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Read out fault memory of DME control unit.
Turn off ignition.
Remove coolant EXPANSION TANK .

Unlock plug (1) and remove.

Unfasten screws (2).

Tightening torque 13 62 2AZ .

Pull pressure sensor (3) out of left intake manifold.

Fig 1: Identifying Pressure Sensor, Plug And Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Delete fault memory.