LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3533 (General Electrical System - Repair) >> Control Units, Modules >> 61 35 683 Replacing optics for solar rain/light sensor

61 35 683 Replacing optics for solar rain/light sensor

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks 

Optics can only be replaced in the following equipment specifications: 

Carefully unlock catches (1) of solar rain/light sensor (2).

Remove optical element for solar rain/light sensor (3).

Installation: 

Detach protective cover from new optical element for solar rain/light sensor.

Catches (1) of solar rain/light sensor (2) must not be damaged or missing.

Observe laser marking (4) of fitting aid.

Fig 1: Identifying Solar Rain/Light Sensor, Catches And Laser Marking
G08530611Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

When fitting a different type of windscreen, carry out CODING  to determine the windscreen type for the light sensor.

Carry out INITIALIZATION  to calibrate the rain sensor to the windscreen.