32 00... Moving vehicle into design position
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Move VEHICLE INTO NORMAL POSITION .
- Version with air spring system:
- Remove ignition key
- If necessary, pull fuse for air supply system control unit.
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data
. See REAR AXLE - RIDE HEIGHT E70
or FRONT AXLE - RIDE HEIGHT E70
).
Measure vehicle ride height