00-2300 Assembly stand

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0495187 002300 Assembly stand MW

NOTE: (Assembly stand with universal flange) For mounting engines from S85 [released]

SI number

01 25 04 (155)

Consisting of:

2 = 2299563 Adapter
NOTE: New adapter for the engine assembly stand. Replacement for 83 30 0 495 189 - 00 2 302. [Released]

Fig 1: Identifying Assembly Stand (0495187)
Courtesy of BMW OF NORTH AMERICA, INC.
11 = 0495208 Mat
NOTE: (Set of grooved mats) [Not available separately]
10 = 0495207 Wheel
NOTE: (Rear wheel (with stop)) [Not available separately]
9 = 0495206 Wheel
NOTE: (Front wheel (no stop)) [Not available separately]
8 = 0495205 Shaped element
NOTE: (Front shaped pan) [Not available separately]
7 = 0495204 Collection pan
NOTE: (oil trap) [released]
6 = 0495203 Shaped element
NOTE: (Rear shaped pan) [Not available separately]
5 = 0495202 oddments tray
NOTE: (Oddments tray for small parts) [Not available separately]
4 = 0495201 Cover
NOTE: (protective cover) [released]
3 = 0495200 Crank
NOTE: [Released]
2 = 0495189 Tool
NOTE: (Universal flange). Do not use any more!!! Technically locked. Replaced with a new flange with material number 83 30 2 299 563. All flanges delivered until the end of 2011 will be replaced at no charge. From 2012, only the new flange will be supplied. Also applies to the complete engine mounting stand 00 2 300. [Replaced]
1 = 0495188 Assembly stand
NOTE: available only as complete assembly support 83 30 0 495 187. [Not available separately]