32 00... Move vehicle into normal position

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - (E60)
Version with air spring system:
- Carry out ride-height-calibration.
- Pull fuse(s) for air supply unit control unit.
Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary.
Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - E60 ) into vehicle.
Determine vehicle ride height. Refer to RIDING HEIGHT .
NOTE: If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA - E60 ), the vehicle must be repaired (coil spring/leakage).