32 00... Test conditions for chassis/wheel alignment check
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Correct and identical rim and tire sizes.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire inflation pressure (see instruction plate on car).
- Wheel bearing clearance OK
- Steering backlash OK
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
- Cars with ride level control: Pull fuse of air supply unit so that there is no controlling down or up.