61 31 996 Carrying Out Steering Angle Sensor Adjustment
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function Initial operation/adjustment for active front steering
and must not be carried out separately!
NOTE:
Steering angle sensor adjustment must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- E46 (AWD), E53, E83: after disconnection of battery
- after replacement/coding/programming of the following components:
- Fixture for switches of steering column/switch cluster/steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Control unit active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system or Software Service Station.