61 14... Removing And Installing/Replacing Engine Compartment B+ Terminal
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on handling wiring harnesses
and cables.
Necessary preliminary tasks:
- Remove cover from electronics box . See 12 90... REMOVING AND INSTALLING/REPLACING ELECTRONICS BOX (N51) or 12 90... REMOVING AND INSTALLING/REPLACING ELECTRONICS BOX (N52) .
NOTE:
Work is shown on the E82 N52N by way of example. There may be differences in detail in the case of other vehicle models.
Unclip covers (1) and release nuts underneath. Tightening torque, see 61 12 4AZ in 61 12 AUXILIARY CABLE .
Remove battery positive cables.
Unclip cover (1).
Unscrew nuts (1). Tightening torque, see 61 12 4AZ in 61 12 AUXILIARY CABLE .
Remove battery positive cables.
Release locks (2) and remove frame (3) towards rear from B+ terminal.
Unclip B+ terminal and remove towards front.
Installation:
Make sure frame (3) engages correctly in B+ terminal.