LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2112 (General Electrical System - Repair) >> Switch >> 61 31 195 Removing and installing (replacing) front controller (until 09/2008)

61 31 195 Removing and installing (replacing) front controller (until 09/2008)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:

Risk of damage!

Before dismantling it is imperative to note whether the controller is installed with a version before or after 09/2008  !

NOTE: The number of buttons and shape of controller can vary depending on vehicle type.

Before 09/2008:  Controller (1) has buttons on bottom only  .

After 09/2008:  Controller (2) has buttons top and bottom  .

NOTE: These repair instructions describe the removal and installation (replacement) of controller (1)  !
Fig 1: Identifying Number Of Buttons And Shape Of Controller
G06855285Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT:

Risk of damage!

The button for the controller must not  be removed!

Necessary preliminary tasks: 

If necessary, disconnect plug connections.

Release screws (1).

Remove controller (2) in direction of arrow from storage compartment (3).

Fig 2: Identifying Storage Compartment, Controller And Screws
G04761634Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING .