LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Throttle Body >> Removal & Installation (6-Cylinder)

Removal & Installation (6-Cylinder)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1997 BMW Z3, 1997 BMW M3, 1997 BMW 840Ci, 1997 BMW 740iL, and 1997 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove mass airflow sensor. See MASS AIRFLOW SENSOR . Disconnect accelerator and cruise control cables from throttle body.
  2. Loosen hose clamps and remove hoses attached to bottom of throttle body. Disconnect throttle position switch connector. Remove 4 bolts, throttle body and gasket. See Figure. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals