65 11... Instructions on setting the installation location on the CD changer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To ensure trouble-free CD changer operation, ensure both suspension springs are correctly positioned (horizontal/vertical). If necessary, correct adjustment.
To avoid premature contamination of the CD changer, make sure the magazine compartment flap is permanently closed.

NOTE: For purposes of clarity, the following graphics show the CD changer removed.

NOTE:

Observe the following repair instructions if the magazine cannot be removed from the CD changer.
- E60, E61, E63, E64:
  Remove CD changer magazine

Remove cover cap (1) from CD changer (2).

Fig 1: Remove Cover Cap From CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Arrange installation location of CD changer (2) with a suitable tool by sliding suspension spring (1) into required position.

Fig 2: Identifying Suspension Spring And CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.